山型橡胶止水带报价

山型橡胶止水带是采用国家标准GB18173.2-2000标准组织生产的，尺寸公差一律按国家标准执行，如用户有特殊要求，可按用户要求制造。橡胶止水带和止水橡皮系以天然橡胶与各种合成橡胶为主要原料,掺加各种助剂及填充料,经塑炼、混炼、压制成型,其品种规格较多,有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等.根据使用情况又可分类为埋式橡胶止水带和背贴式橡胶止水带。该止水材料具有良好的弹性,耐磨性、耐老化性和抗撕裂性能,适应变形能力强、防水性能好,温度使用范围为-45℃-+60℃.当温度**过70℃,以及山型橡胶止水带受强烈的氧化作用或受油类等**溶剂侵蚀时,均不得使用山型橡胶止水带。
    山型橡胶止水带广泛应用于施工缝、变形缝桥梁伸缩缝的施工，具有可检测、可注浆修补特点的止水带；该产品可适用于所有地下防水、排水结构的工程建设中，如挡水坝、蓄水池、地铁隧道、地下室等。
Widely used in construction joints, deformation joint construction of bridge joint hill type rubber sealing strip, with detection and repair features with sealing grouting; the product can be applied to all underground waterproof and drainage structure in engineering construction, such as dams, reservoirs, subway tunnels, underground etc..
山型橡胶止水带保存运输注意事项：
Precautions for the preservation and transportation of the mountain rubber sealing belt:
山型橡胶止水带在运输与贮存时不能长时间露天曝晒，防止雨淋，勿与污染性强的化学物质接触，防止机械，钢筋损伤。产品应存放场所较好保持-10℃－+30℃，相对湿度在40%－80%应注意勿使其损坏，放置于通风、干燥处、并应避免阳光直射，禁止与酸碱油类等接触，且隔离热源，应保存于室内，并不得重压，成品应取直平放，勿加重压。存放场所较好保持-10+30，相对湿度40%80%。自生产日期起半年内产品性能应符合国家标准的规定。
Mountain type rubber water stop can not be exposed for long time in transportation and storage, so as to prevent rain. Do not contact with chemical substances with strong pollution and prevent mechanical and steel damage. The product should be stored to keep the best places for -10 DEG C to +30 DEG C, relative humidity between 40% and 80% should pay attention not to damage and placed in a dry and ventilated place, and should avoid direct sunlight, no contact with the acid oil, and isolating heat, should be kept in the room, and no weight of finished products should be straight flat do not add weight. The best storage place is -10+30, and the relative humidity is 40%80%. The performance of the product within six months from the date of production shall be in accordance with the regulations of the state standard.